Refer to the samples below to select the pattern that has the least noticeable white streaks and horizontal white stripes. To print and check the current head position adjustment values, click Print Alignment Value in the Start Print Head Alignment dialog box.
To print and check the current head position adjustment values, click Print Alignment Value in the Starting print head alignment. Was this helpful? Thank you! Your feedback is used to help us improve our support content.
It solved my issue. It covered my problem, but the solution still didn't work for me. If you do not find any defects, skip to the Clean the electrical contacts step. Step 4: Clean the printheads Use a printhead cleaning tool to help prevent streaks, smudges, or lines that can interfere with the alignment process. Printer control panel printers with control panel menus : From the Settings , Setup , or Tools menu, select the option to clean the printheads.
HP Utility Mac : Click the option to clean the printheads. If any defects remain, replace the printheads. For instructions, go to HP Customer Support , type your printer model, and then search for a 'Replacing Printheads' document.
If no defects remain, print another alignment page, and then follow any prompts to scan it and complete the alignment process. Step 5: Clean the electrical contacts Ink on the electrical contacts can cause printing errors. Carefully clean the contacts, and then try printing again. Clean, distilled water. Use bottled water if you cannot use distilled water. Tap water might contain contaminants that can damage cartridges. Clean cotton swabs or any soft, lint-free material that does not stick to the cartridges, such as coffee filters.
Open the ink cartridge access door, and then wait for the carriage to stop moving. Remove the ink cartridges, and then place them on a clean, protected surface, such as a piece of paper, with the nozzles facing up. Dip the cotton swab in the distilled water, and then squeeze any excess water from it. Hold a cartridge by its sides, and then clean the copper-colored contacts only.
Cartridge contacts. Dampen a new cotton swab, and then use it to clean the matching electrical contacts inside the printer. Wait at least 10 minutes for the cartridges and electrical contacts in the printer to dry. Restart the printer or send another print job. If an alignment page prints, continue to the next step. Step 6: Replace the cartridges Faulty or damaged cartridges in your printer can cause errors. Replace all ink cartridges.
The product remembers the alignment values for each cartridge. Remove the new cartridges from their packaging, and then remove any protective tape or plastic. Step 7: Reset the printer Resetting the printer can resolve some errors. Align the cartridges in the following instances. As a final step in setting up your product. Aligning Ink Cartridges Use one of the following methods to align the cartridges. Double-click the HP Solution Center icon on the desktop to open it.
If the HP Solution Center icon is not on the desktop, follow these steps. The Printer Toolbox opens. Click Align , and then follow the on-screen instructions. The product prints an alignment page, aligns the cartridges, and calibrates the printer. Method two: Print an alignment page using the printer properties Open the Printers folder:.
Right-click the icon for your product, and then click Printing Preferences. Click the Features tab, and then click Printer Services.
The Toolbox opens. The Align the Print cartridges dialog box opens. Select a location.
0コメント